Dental Chair Unit L-A1000

Dental unit

L-A-1000 standard technical parameters

1. Optional parts:
2. 2 high-speed mobile phones
3. 1 set of imported NSK low-speed air motor (including straight and curved machines)
4. Woodpecker pluggable tooth scaler 1 set
5. One set of medical compressor
6. LED light curing machine 1 set
7. One set of endoscope system

Two standard configurations:

1. Anti-cross-infection hygienic design
2. The rotatable assistant frame is good for "four-handed" operation
3. Two three-purpose guns
4. Control system: computer-controlled operating system, computer control panel with reset, chair position lift, pitch, cold light, spittoon flushing, water supply, heating and other functional operation keys.
5. One set of quantitative automatic water supply control system for flushing spittoon and mouthwash, equipped with automatic heating and constant temperature system
6. One set of strong and weak saliva suction systems, and the built-in dirt collection cup can be easily disassembled and washed
7. A set of LED oral cold light lamp
8. 24V low-voltage control mouthwash device and a set of low-voltage film viewer
9. 1 set of rotatable 90-degree ceramic spittoon
10. A set of built-in mobile phone water purification system
11. One set of pneumatic locking instrument arm
12. Multifunctional combination foot switch, can control mobile phone, dental chair
13. The power system adopts a DC silent motor
14. Water vapor pipelines imported from the United States
15. The structure of the dental chair is a computer linkage type. The headrest can be folded and adjusted and pinned at will. The two-stage headrest is suitable for adults and children. The PU seamless chair cushion can be disassembled, cleaned and replaced at any time with the backrest of the body. Dental chair with single arm

2. Technical parameters:
3. Environment 5-40, relative humidity ≤ 80%
4. Power supply: AC 220V 50HZ
5. Air source pressure: 0.5MPa—0.8 MPa flow rate is less than 50L/min
6. Water source water pressure: 0.2MPa—0.4 MPa flow rate is less than 10L/min
7. Input power: 1200VA
8. Model of fuse: RF1-20, specification: 5x20 6A
9. Oral cold light: LED light source; oral light: the light spot is 800mm away from the lamp surface, the illumination adjustment range is 8000Lux ~ 26000Lux, the temperature rise of the lighting area is ≤5°C, and the rotation range of the oral light is ≥120
10. Film viewing lamp: illumination ≥ 6000 Lux
11. Water heater: DC24V/80VA
12. DC motor: d.c.24V/80VA
13. Range of reclining angle of backrest: 120mm
14. The maximum angle of seat back tilt: ≥10°
15. The dental chair can bear 135kg
16. The noise of the whole machine is ≤70db (A) (except air compressor)
17. The lowest chair position≦380mm, the highest chair position≧720mm
18. The handrail can withstand a vertical downward pressure of 335N and a horizontal tensile force of 220N
19. Instrument tray: the vertical movement range should be ≥350mm, and the deflection of the tray surface should be ≤3°